Quantum-composers 9200 Series Manual do Utilizador descarregar pdf (Página 37)

9200 Manual Version 1.6 | Quantum Composers Page 37

:PCOunter

1-1,000,000

Changes the number of on

pulses to output when the

system is in Duty Cycle

mode.

*Note: The commas should

be omitted.

:OCOunter

1-1,000,000

Changes the number of off

pulses to suppress when the

system is in Duty Cycle

mode.

*Note: The commas should

be omitted.

:EXTernal

Submenu for selecting the

trigger input

:MODe

DISabled /

TRIGger /

GATe

Selects the trigger mode*

:LEVel

0.2 - 15[V]

Choose the gate level

threshold to trigger on which

should be set to ~ 50% of the

input voltage.

:EDGe

RISing / FALLing

Selects which edge (rising or

falling) to use as the trigger

signal

:POLarity

LOW / HIGH

Sets the polarity of the gate

signal. HIGH output is active

when the gate signal is high;

LOW output is active when

the gate signal is low.

* It should be noted that when the 9200 is in external trigger mode, a single pulse ONLY will be produced on the

active channels upon each external input trigger. The standard 9200 model cannot be configured to produce a

continuous, burst, or duty cycle pulse train on an external input trigger. The 9200 Plus model may be configured

to output a single pulse, burst of pulses, or duty cycle response of pulses upon each external input. See Appendix

C for more information on the 9200 Plus model.

Command

Keyword 1

Keyword 2

Keyword 3

Parameter Range

Notes

:PULSe[1/2/n]

Command to change the

units’ channel specific

settings.

:STATe

0/1 or OFF/ON

Enables/Disables output

pulse for selected channel.

:WIDTh

10[ns] – 1000[s]

Sets the pulse width for the

selected channel. The

command should be sent

without units. If for example

50ns is desired the parameter

sent should be 50e-9, or the

decimal equivalent.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Comentários a estes Manuais

Sem comentários

Quantum-composers 9200 Series Manual do Utilizador Página 37

Comentários a estes Manuais

Manuais e produtos relacionados com Geradores Quantum-composers 9200 Series