Quantum Composers 9530 Series Manual do Utilizador descarregar pdf (Página 12)

Note: If you overwrite a particular location, its previous contents are destroyed.

A configuration is stored by using the Up and Down arrow keys to select the memory location

number. Press the Left or Right arrow key, at which time you will prompted to press the

key to verify that you want to overwrite the existing stored configuration. If you press any

other key, the configuration will not be saved.

RECALL Configuration

Recalls a previously stored configuration from the specified memory location. To recall a

configuration use the Up and Down arrow keys to select the memory location number and

press the Left or Right arrow key. You will prompted to press the key to verify that you

want to overwrite the active configuration. If you press any other key, the configuration will

not be recalled.

Note: A zero configuration is available for recall. This configuration resets the instrument to

the factory default settings.

Shot Counter

The 9314E includes a nine (9) digit shot counter. A separate count is kept for each configura-

tion. The maximum count displayed is 4,294,967,295, after which the count rolls over to zero.

To manually reset the counter to zero, press the Left or Right arrow key, at which time you

will prompted to press the key to verify that you want to zero the counter. If you press

any other key, the shot counter will not be reset.

Fmark

The character used as a decimal point can be set to either a "." (period) or a "," (comma).

The period is generally used in North America, while the comma is used in Europe.

Volume

The key click volume may be adjusted from 0 (disabled) to 9. The default value is 2.

GPIB:Addr

This menu sets the GPIB address for systems with the optional GPIB interface. The valid

address range is from 0 to 30.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Sem comentários

Quantum Composers 9530 Series Manual do Utilizador Página 12