Quantum Composers 9530 Series Manual do Utilizador descarregar pdf (Página 19)

9314E Communication Commands

Command Name Parameters Description

MODE 0 = Continuous mode

1 = Burst mode

2 = Duty Cycle mode

3 = Single Shot mode

4 = External Trigger mode

Sets the pulse generator mode.

GATE 0 = off

1 = active low

2 = active high

Enables the external trigger input to function as a gate

controlling all outputs. Cannot be used with external

trigger mode.

ToPer 1000 - 999999998 Sets the To internal sync period, in microseconds * 10.

DC:On 1 - 10000 Sec Sets the on time, in seconds, for the Duty Cycle mode.

DC:Off 1 - 10000 Sec Sets the off time, in seconds, for the Duty Cycle mode.

TRIG 0 = falling edge

1 = rising edge

Sets the active edge of the Ext/Gate signal when used as

an external trigger.

CYCLES 0 - 10000 cycles Sets the number of cycles for the Duty Cycle mode.

#/BURST 1 - 30000 pulses Sets the number pulses in the Burst mode.

T1a -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 1a.

T1a= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 1a.

T1b -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 1b.

T1b= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 1b.

T1:Pol 0 = Off

1 = Negative (active low)

2 = Positive (active high)

Sets the polarity of the output for Channel 1.

T2a -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 2a.

T2a= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 2a.

T2b -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 2b.

T2b= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 2b.

T2:Pol 0 = Off

1 = Negative (active low)

2 = Positive (active high)

Sets the polarity of the output for Channel 2.

T3a -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 3a.

T3a= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 3a.

T3b -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 3b.

T3b= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 3b.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Comentários a estes Manuais

Sem comentários

Quantum Composers 9530 Series Manual do Utilizador Página 19

Comentários a estes Manuais