Quantum Composers 9530 Series Manual do Utilizador descarregar pdf (Página 20)

9314E Communication Commands

Command Name Parameters Description

T3:Pol 0 = Off

1 = Negative (active low)

2 = Positive (active high)

Sets the polarity of the output for Channel 3.

T4a -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 4a.

T4a= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 4a.

T4b -999999998 - +999999998 Sets the delay, in microseconds * 10, for edge 4b.

T4b= 0 - 8

( 0=To, 1=1a, 2=1b, etc.)

Sets the sync edge for edge 4b.

T4:Pol 0 = Off

1 = Negative (active low)

2 = Positive (active high)

Sets the polarity of the output for Channel 4.

BEEP 1 - 1000 Beeps the buzzer the specified number of times.

RUN 0 = Disable

1 = Enable

Enable / disables the pulse generator output.

RECALL 0 - 12 Recall a stored configuration.

STORE 1 - 12 Store a configuration.

SHOTS 0 = Reset to zero Resets shot counter. SHOT ? will return the number of

shots.

ECHO 0 = Disable

1 = Enable

Enables/Disables the RS232 echo. The result string is

always sent back.

Fmark, 0 = , (comma)

1 = . (period)

Sets the character used as a decimal point on the display.

VOLUME 0 - 9 Sets the key click volume level.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

Sem comentários

Quantum Composers 9530 Series Manual do Utilizador Página 20